Flash Memory Connection (Optional); Connect Flash Memory; Remove Flash Memory; About Mp3/Wma File Of Flash Memory - Alpine CDE-143BT Manual

Flash Memory Connection (optional)

Connect Flash Memory

1
Open the cover of the USB Port.
2
Connection the Flash Memory directly to the USB Port, or
via the USB cable.
This unit

Remove Flash Memory

1
Carefully, pull out the Flash Memory Device from the USB
cable or the USB Port.
2
Close the cover of the USB Port.
Notes
• Change to a source other than the Flash Memory mode, then remove
the Flash Memory Device. If Flash Memory is removed in the Flash
Memory mode, data may be damaged.
• When removing Flash Memory, pull it out straight.
• If sound is not output or Flash Memory is not recognized even when
connected, remove the Flash Memory Device once, and then connect it
again.
• Route the USB cable away from other cables, etc.
• After removing the Flash Memory, close the cover of the USB Port to
prevent dust or foreign objects from entering and causing a
malfunction.

About MP3/WMA File of Flash Memory

Playing back MP3/WMA
MP3/WMA files are prepared, then stored to a Flash Memory Device.
This unit can recognise at most 255 folders and 255 files per folder
stored in Flash Memory. Playback may not be performed if a Flash
Memory Device exceeds the limitations described above.
Do not make a file's playback time more than 1 hour.
Media supported
This device can play back files stored on Flash Memory devices
designed for USB connection.
Corresponding File Systems
This device supports FAT 12/16/32 for Flash Memory devices.
USB Connection Terminal
Flash Memory
(sold separately)
or
Flash Memory
Cable (sold
(sold separately) separately)

iPod/iPhone (optional)

SOURCE/ 
Rotary encoder

/ENTER/OPTION
/ II


BAND/ABC SEARCH
The illustration is for CDE-SXM145BT/CDE-143BT.

Connecting an iPod/iPhone

An iPod/iPhone can be connected to this unit by using the Interface
cable for iPod (included with iPod). When an iPod/iPhone is connected
to this unit, you can choose to control the iPod/iPhone using its own
controls or by the head unit controls. For details, refer to "Setting the
iPod Control" on page 30.
These instructions refer to controlling the iPod/iPhone from this Head
Unit (HU) only. Make sure iPod Control is set to HU MODE (HEAD
UNIT). Refer to "Setting the iPod Control" on page 30. Refer to the
iPod/iPhone manual for operations using the iPod/iPhone.
This unit
iPod/iPhone
(sold separately)
Notes
• An iPhone connected to this unit operates as an iPod. The iPhone can
be used as a hands-free device using the integrated BLUETOOTH
module.
• Internet and telephone functions of iPod touch or iPhone, etc., can also
be used when connecting to the unit. However, using these functions
will stop or pause the playing songs. Stop using any applications or the
phone functions before going back to music playback on your device .
About iPod/iPhone models usable with this unit
• Confirmed devices regarding Made for iPod. Correct function of
earlier versions cannot be guaranteed.
iPod touch (4th generation): Ver.5.1.1
iPod nano (6th generation): Ver.1.2
iPod touch (3rd generation): Ver.5.1.1
iPod nano (5th generation): Ver.1.0.2
iPod classic (160 GB) (Late 2009): Ver.2.0.4

5
1

2 4
Preset buttons
(1 through 6)
USB Connection Terminal
Included with iPod/iPhone
29
-EN