Tascam HS-P82 Manual page 3

mode (button)
•
UserWord
Select this to use the user name as the first half of the
take name. Press the
EDIT
where you can edit the user word. (This is like the proj-
ect name editing screen.)
mode (button)
•
FolderName
Select this to use the folder name as the first half of the
take name. This is the default setting.
ª Take name second half
The second half of the take name is made of one
alphabetical letter and three numerical digits.
Press the button to open an editing screen where
EDIT
you can set the one letter. You can also set the three
numbers by using the " " and "
–
functions in the same way as the NEXT TAKE function
accessed by the
REC TRACKS
and functions of parts" in the Owner's Manual for details.)
NOTE
Since the "Next Take Name" setting is saved by project, if
•
the project is changed, that project's setting will be used.
The numerical portion of the second half of the take
•
name can be changed even during playback and
recording. (The first half of the take name and the letter
in the second half can only be changed when the unit is
stopped.)
If the first half of the take name or the letter in the
•
second half is different, it is now possible to create takes
that have the same three digits in the latter half.
Mono file recording folder selection
When the file mode is set to
select from two types of folders for recording audio files.
The default setting is
SubFolder
NOTE
In either mode, subfolders are created for each take
inside folders, and this is where the management files are
generated.
button to open the screen
" buttons. (This
+
button (q). See "2 – Names
mode, you can now
MONO
.
SubFolder mode
ª
In the same way as before, subfolders are created for each
take inside folders, and recorded audio files are saved in
them.
Folder mode
ª
Recorded audio files are saved directly inside the folder.
NOTE
Whether the file mode is set to "Poly" or "Mono,"
•
when Folder mode is selected, the maximum number
of takes that can be recorded in one folder might be
significantly less than usual in some cases. For this reason,
the following pop-up window opens when switching
to Folder mode, warning that the maximum number of
takes will be reduced.
Moreover, the following pop-up window opens when
switching back to Subfolder mode to let you know that
the maximum number of takes has been increased again
During recording, if you press the REC key to try to start
•
the next take, the next take can be recorded 4 seconds
after starting recording when in poly mode or mono
subfolder mode. In folder mode, however, some cases
will take more than 4 seconds.
HS-P82
3