Tascam HS-P82 Manual page 10

New pop-up messages added in HS-P82 V1.10
Message
Cannot Change Now
Fixed in current Fs.
CF1 Media Full.
CF1:Stopped.
CF2:still RECORDING.
CF1 Record Error.
CF1:Stopped.
CF2:still RECORDING.
CF2 Media Full.
CF1:still RECORDING.
CF2:Stopped.
CF2 Record Error.
CF1:still RECORDING.
CF2:Stopped.
Initializing ...
Mirror REC is not available.
(CFn is not available)
Mirror REC is not available.
CFn formatting not optimal
for Recording.
Mirror REC is not available.
CFn not recommended type
for Recording.
(not UltraDMA)
The wordings of the following pop-up messages have changed.
Old message
CFn not recommended format
for Recording/Playing.
CFn not recommended
for Recording/Playing.
（not UltraDMA）
10
TASCAM HS-P82
Details and responses
The current sampling frequency cannot be changed.
Because CF1 does not have enough space, recording to it has
stopped. Recording to CF2 is continuing.
Because an error occurred when recording to CF1, recording to it
has stopped. Recording to CF2 is continuing.
Because CF2 does not have enough space, recording to it has
stopped. Recording to CF1 is continuing.
Because an error occurred when recording to CF2, recording to it
has stopped. Recording to CF1 is continuing.
The card is being initialized.
Since the media cannot be used, mirror recording is disabled.
Because the media was not formatted by this unit, recording
properly cannot be guaranteed, so mirror recording is disabled.
Format the media with this unit to use it.
Because this card does not meet the required system specifications,
recording properly cannot be guaranteed, so mirror recording is
disabled.
New message
CFn formatting not optimal
for Recording/Search.
CFn not recommended type
for Recording/Search.
（not UltraDMA）
Details and responses
Because the media was not formatted by
this unit, recording/searching properly
cannot be guaranteed, so mirror recording
is disabled. Format the media with this unit
to use it.
Because this card does not meet the
required system specifications, recording/
searching properly cannot be guaranteed.
HS-P82
Remarks
This occurs when the REC Mode is
set to Mirror.
This occurs when the REC Mode is
set to Mirror.
This occurs when the REC Mode is
set to Mirror.
This occurs when the REC Mode is
set to Mirror.
This occurs when the REC Mode is
set to Mirror.
n = 1 or 2
This occurs when the REC Mode is
set to Mirror.
n = 1 or 2
This occurs when the REC Mode is
set to Mirror.
n = 1 or 2
Remarks
n = 1 or 2
This occurs when the card is
formatted with a cluster size
that is smaller than specified
by this unit.
n = 1 or 2