Caring For Your Machine - Brother PQ-1300 Operation Manual

Caring for Your Machine

Note
Make sure power is off before
cleaning sewing machine.
1 Turn machine off.
2 Remove foot.
3 Remove needle plate.
4 Clean out dust and thread scraps.
Thread scraps can be swept out
through the bobbin door.
5 When the area under the needle
plate is cleaned out, oil hook of
b o b b i n c a s e w i t h s e w i n g
machine oil.
6 Attach needle plate and foot.
Keep Your Sewing Machine Clean
Please use a soft, dry cloth to wipe off light dirt and
dust. If sewing machine is very dirty, wipe with a cloth
soaked in warm water, or in warm water containing a
neutral detergent. Then wipe off any detergent
residue, and wipe off water with a dry cloth.
Precautions
Please keep sewing machine away from heat sources
such as irons and space heaters. Do not use chemicals
like benzine or thinner to clean your machine. When
machine is not in use, please keep machine out of
direct sunlight.
Item Specification
Sewing Speed
1,300 stitches per minute
(maximum)
Stitch Length
0 – 7mm
(pitch)
Stroke of
34.1mm
Needle
Stroke of
Thread Take-
61.4mm
Up Lever
One 6mm
Foot Lift
Foot Height Two 9mm
Knee control Over 10mm
Hook
Item Specification
Height of feed dog 0.7mm 1.1mm
Height of
3mm – 3.5mm
lower needle
Needles that HLX5#9 – #16
may be used SCHMETZ 130/705H #65 – #100
Bed dimensions 439mmX178mm
Total weight 10kg
Motor 120V 60Hz
Sewing Light 120V 15W 60Hz
Sewing area 595mmX285mm
17