Toshiba 39L4300UM User Manual page 33

To connect the IR blaster cable:
1
Locate the infrared sensor on the front of your device. This sensor
is marked on some devices. If you are having issues locating the
device's infrared sensor, see
infrared sensor:" on page
2 Align one of the IR blaster cable's wands approximately 1 inch
away from the infrared sensor on the front of the device and attach
it using double-sided mounting tape. If you have a second device,
attach the second wand in a similar manner.
NOTE
If you do not have a second device, coil the second wand with a rubber
band and leave it behind the TV.
3
Plug the IR blaster cable's plug into the TV's IR Blaster Out
terminal.
Front of IR-controlled DVD player (for example)
Front of IR-controlled audio device (for example)
Infrared
sensor
IR blaster cable wand
(approx. 1 inch from device)
(Sample Illustration) L7300U Series—Using the IR blaster OUT
terminal
Connecting remote IR devices
TV back panel
IR
OUT
OUT
Connecting Your TV
"If you cannot locate the device's
34.
Dual-
wand IR
blaster
cable
33