External Devices - HP Compaq nc4000 - Notebook PC Hardware Manual

The jacks and connectors described in this guide support
standard external devices.
For information about which jack or connector to use, refer
to the documentation included with the device.
For information about installing or loading any software,
such as drivers, required by the device, refer to the
documentation included with the device.
To connect a standard external device to the notebook:
1. Turn off the notebook.
2. If you are connecting a powered device, turn off the device.
3. Connect the device to the connector on the notebook.
4. If you are connecting a powered device, plug the device
power cord into a grounded electrical outlet.
5. Turn on the device.
6. Turn on the notebook.
To disconnect a standard external device from the notebook, turn
off the device, then disconnect the device from the notebook.
Hardware Guide

External Devices

7
7-1