10-17.Moving Stitch Patterns - Brother LK3-B432E MKII Instruction Manual

10-17 . Moving stitch patterns
· Programs which have already been programmed can be moved up, down and to the left and right. (How-
ever, such patterns will be reset if the power supply is turned off or the program number is changed.)
· The feed position can be set to the any position desired.
r
t
e
1. Select the program number, and then press the start switch once to move the feed mechanism to the
sewing start position.
2. Press the SELECT switch q until the PROGRAM NO. indicator w illuminates.
3. While pressing the TEST switch e, press the RESET switch r.
* The TEST indicator t will illuminate and <
4. Press the SELECT switch q so that either the X-SCALE indicator u or Y-SCALE indicator i illuminates.
5. Press the DISPLAY SET switches o to move the feed mechanism one pulse at a time.
• If the DISPLAY SET ( ) switch is pressed while the X-SCALE indicator is illuminated, the feed mecha-
nism will move to the left.
• If the DISPLAY SET ( ) switch is pressed while the X-SCALE indicator is illuminated, the feed mecha-
nism will move to the right.
• If the DISPLAY SET ( ) switch is pressed while the Y-SCALE indicator is illuminated, the feed mecha-
nism will move down.
• If the DISPLAY SET ( ) switch is pressed while the Y-SCALE indicator is illuminated, the feed mecha-
nism will move up.
6. When the TEST switch e is pressed after the above fine adjustments have been made, the TEST indicator
t and display window y will both switch off and movement of the stitch pattern will be completed.
NOTE:
When moving the stitch pattern, take the whole of the pattern area into consideration so that no parts extend outside
the sewing area when the pattern is sewn.
* If you would like to set the feed position to a desired position, carry out steps 2. to 6. above while the display window
y is flashing. The stitch pattern will not be moved at this time.
B430E
w
PROGRAM NO.
P
POWER
u
X - SCALE
i
R E S E T
Y - SCALE
SPEED
T E S T
COUNTER
S E L E C T
BOBBIN.WIND
q
> will appear in the display window y.
LK3-B430E-, B431E-, B432E-, B433E- Mark II
10 . STANDARD ADJUSTMENTS
Series
P1 P2
P3 P4
y
o
42