Warning Labels - Brother LK3-B432E MKII Instruction Manual

3. Warning labels

The following warning labels appear on the sewing machine.
Please follow the instructions on the labels at all times when using the machine. If the labels have been removed or are
difficult to read, please contact your nearest Brother dealer.
1
Hazardous voltage
will cause injury.
Turn off main
switch and wait 5
minutes before
opening this cover.
2
Moving parts
may cause injury.
Operate with safety devices.
Turn off main switch before
threading, changing bobbin
and needle, cleaning etc.
Be sure to connect the ground. If the ground connection is not secure, you run a high risk of receiving a
3
serious electric shock, and problems with correct operation may also occur.
4 Direction of operation
Eye guard
Thread take-
up solenoid
cover
Finger
guard
Motor cover
LK3-B430E Mark II
LK3-B432E Mark II
LK3-B433E Mark II
iv
Hochspannung Un voltage non adapté
verletzungsgefahr! provoque des blessures.
Bitte schalten sie den Eteindrel'interrupteur et
hauptschalter aus und attendre 5 minutes
warten sie 5 minuten, avantd' ouvrir le capot
bevor sie diese
abdeckung öffnen.
Safety devices
Eye guard
Finger guard
Thread take-up cover
Thread take-up solenoid cover
Belt cover
Motor cover, etc.
4
Thread
take-up
cover
2
Belt cover
Thread take-up cover
Thread take-up
solenoid cover
[LK3-B431E Mark II]
LK3-B430E-, B431E-, B432E-, B433E- Mark II
Un voltaje inadecuado
puede provocar las
heridas.
Apagar el interruptor
principal y esperar 5
minutos antes de abrir
esta cubierta.
1
3
Eye guard
2
Finger
guard
B432E Mark II
4
Belt cover
Motor cover
1
3