Irregular Pulse Function - Panasonic EW-BW30S Operating Instructions Manual

Irregular Pulse Function
If the pulse rate varies by more than ±25 % from the average while a
measurement is being taken, when measurement is completed the
mark will be displayed.
• The mark will lit after approximately 6 seconds of blinking when the
measurement is completed.
• If the mark is lit, please take the measurement again.
• In some cases, if the pulse rate fluctuates greatly while a measurement
is being taken, it may be impossible to obtain an accurate reading.
• If you save a reading where an irregular pulse was recorded, the
mark will be displayed when you recall that reading.
Even if the
pulse is, in fact, irregular.
* This function is designed to act as a guide to help you to obtain
accurate readings (please see page 14).
Even if the
measurements 2–3 times at rest.
* If the mark is frequently displayed, please consult a health
professional for your health condition.
Don't try to interpret readings or attempt to treat any condition
yourself.
Always follow the guidance of a health professional.
25
English
mark is displayed, this doesn't mean whether or not the
mark is not displayed, we recommend that you take