Movement Detection Function - Panasonic EW-BW30S Operating Instructions Manual

Movement Detection Function
If movement is detected while measurement is being carried out and more
pressure is applied by the pressure cuff, the
• Please carry out blood pressure measurement again if the
flashes or is lit.
• If the hand or wrist to which the pressure cuff is attached is moved while
measurement is being carried out (e.g. wrist is bent suddenly), in some
cases correct measurements may not be obtained.
• When movement has been detected during measurement, the
mark flashes when the blood pressure reading obtained during that
measurement is displayed.
(If this reading is saved, the
recalled.)
Movement Mark
Flashing
Flashing
Lit
* This function is designed to help you to take measurements accurately.
Even if the Movement mark is not displayed, we recommend that
measurements be taken 2–3 times in a comfortable position in order to
obtain an accurate reading.
mark will be lit up whenever it is
Movement has been detected.
• The hand or wrist has been bent suddenly.
• The muscles in the hand or wrist have been
tensed.
• The hand or wrist has been moved, etc.
With proper posture, please take the measurement
again after measurement has been completed
(please see pages 14 and 15).
Movement has been detected that will significantly
affect the reading.
• Significant movement has been detected.
• Movement has been detected repeatedly.
• Significant hand or wrist movement has been
detected, etc.
Please take the measurement again (A
appear on the display).
* A will also appear on the display in the
following cases:
• When the pressure cuff hook-and-loop fastener
has become loose, etc.
mark will be displayed.
Explanation
mark
will
24
English