Table of Contents
Advertisement
PowER
suPPL
v
A. AC ADAPTOR (SUPPLIED)
Adaptor
Connector
Power Indicator
Lamp
1.
Turn Power OFF to connect.
2.
Attach the Adaptor Cable of
the
AC Adaptor
to the
Adaptor Connector of your Movie.
3.
Connect the AC Power Plug to an AC outlet.
Power
Indicator
lights up.
HOW TO CHARGE A BATTERY PACK
B. CAR BATTERY CORD (OPTIONAL)
Battery
Compartment
Cigarette Lighter Plug
1
.
Turn Power OFF to connect.
2.
Insert the Car Battery Cord
into
the Battery
Compartment on your Movie.
3.
Take the lighter out of its socket.
4.
Start the car engine and insert
the
cigarette
lighter
plug of the Car Battery Cord
into
the socket. For
fuse
(in
plug) replacement, use the exact current
rating
(Amps).
Your AC Adaptor can be used to charge one Battery Pack in either of the two ways shown below, or both
methods
can be used together to charge two Battery Packs at the same time.
CHARGING DIRECTLY ON THE AC ADAPTOR
Power Indicator Lamp
Charging Indicator Lamp
1 .
Connect the AC Power Plug of the AC Adaptor to
an AC outlet. Power Indicator lights up.
2.
Place the Battery Pack
in
the AC Adaptor as
illustrated
here.
J
~'
·'
CHARGING DIRECTLY IN THE MOVIE
1.
Be sure to turn your Movie
OFF.
Battery Charging will not
take
place
if
your Movie
is
ON.
2.
Attach the Adaptor Cable of the AC Adaptor
to
Adaptor Connector of your Movie.
3.
Connect the AC Power Plug of
the
AC
Adaptor to
an AC outlet. Power Indicator
lights up.
4.
Insert
the Battery Pack as
illustrated
above.
• The Charging Indicator will light during charging
.
When charging is finished, the Charging
Indicator light will
go out.
• A Battery Pack should charge in about 1 hour and 50 minutes.
• If you charge two Battery Packs at the same time, they should charge together
in
about
3 hours and 40
minutes.
-17-
Hide quick links:
Advertisement
Table of Contents
