Installation Procedure; Verifying The Operating Environment - Brother Innov-ís 2500D Installation Manual

Verifying the Operating Environment

Before starting the Certification Key Issuing Wizard,
check that the computer to be connected meets the
following operating conditions.
Computer IBM-PC or compatible computer
Operating System
Windows
XP or Windows Vista
CD-ROM drive Required for installation
Others Internet connection available
and one available USB port
(required to upgrade the sewing
machine)
* IBM is a registered trademark of IBM Corporation in the United
States and other countries.
* Windows is a registered trademark of Microsoft Corporation in the
United States and other countries.
1
* Windows 98SE requires a driver. Download the driver from our
web site (http://solutions.brother.com). In addition, only
Windows 98 Second Edition can use the driver.
® 1
98SE* , Me, 2000,
®

Installation Procedure

The following procedure describes how to upgrade
your sewing machine to version 2.
Note
• If the procedure described below is not fully
completed, your sewing machine cannot be
upgraded to version 2.
• Access to the Internet is required in order to obtain a
certification key.
a
Make a note of the 10-digit number (machine
number) displayed beside "NO." on P.6 of the
settings screen.
Memo
• Since this number will be entered when a
certification key is obtained, be sure to write it down
correctly.
Note
• If information other than a 10-digit number appears
beside "NO.", update the sewing machine to version
1.01 or later before installing the upgrade
application. For details on the update procedure,
refer to page 208 of the sewing machine's Operation
Manual.
• The number that appears beside "NO." is different
from the serial number (SER. NO.) on the label
attached to the back of the sewing machine.
Machine
number (NO.)
3