I N S TA L L AT I O N I N S T RU C T I O N S
COOKTOP INSTALLATION
Install the retainer brackets to the bottom of the
3
cooktop; then snug the bolts against the bottom
of the countertop as shown.
Preferred
installation
Retainer
brackets
FINAL CHECK
Perform a final operational check of the cooktop,
making sure the cooktop powers on properly and
that each Cooking Zone operates correctly. Refer
to the Operating Instructions in this guide for
details.
MODEL AND SERIAL NUMBER LOCATION
The model and serial numbers are located on a
plate on the bottom of the cooktop. Please record
them in this guide; you will need them for warranty
registration.
26
(cont.)
NOTE: The retainer brackets MUST be installed to
meet local codes or, in their absence, with the
National Electrical Code ANSI/NFPA No. 70, latest
edition.
Alternative
installation
Cooktop
Countertop
Bolt
Retainer
brackets
CAUTION
Do not touch cooktop glass or Cooking
Zones. They may be hot enough to
cause burns.
Retainer
brackets