Final Check - LG LCE3610SB Service Manual

INSTALLATION INSTRUCTIONS
Install the retainer brackets to the bottom of the
cooktop; then snug the bolts against the bottom
of the countertop as shown.
NOTE: The retainer brackets MUST be installed
to meet local codes or, in their absence, with the
National Electrical Code ANSI/NFPA No. 70,
latest edition.

FINAL CHECK

Check the gap between Cooktop and Countertop.
Perform a final operational check of the cooktop, making sure the cooktop powers on properly
and that each Cooking Zone operates correctly. Refer to the Operating Instructions in this guide
for details.
MODEL AND SERIAL NUMBER LOCATION
The model and serial numbers are located on a plate on the bottom of the cooktop. Please
record them in this guide; you will need them for warranty registration.
CAUTION: Do not touch cooktop glass or Cooking Zones. They may be hot enough to
cause burns.
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Preferred
installation
Retainer
brackets
Alternative
installation
- 18 - LGE Internal Use Only