Ahci Configuration - Asus Z8NA-D6 - Motherboard - ATX User Manual

4.3.6

AHCI Configuration

This menu is the section for AHCI configuration.
Main
AHCI Settings
AHCI CD/DVD Boot Time out
SATA Port1 [Not Detected]
SATA Port2 [Not Detected]
SATA Port3 [Not Detected]
SATA Port4 [Not Detected]
SATA Port5 [Not Detected]
SATA Port6 [Not Detected]
AHCI CD/DVD Boot Time out [35]
Selects the boot time out value for SATA CD/DVD devices in AHCI mode.
Congifuration options: [0] [5] [10] [15] [20] [25] [30] [35]
SATA Port1–6 [XXXX]
Displays the status of auto-detection of SATA devices.
Main
SATA Port1
Device
SATA Port0
SMART Monitoring
SATA Port0 [Auto]
Allows you to select the type of device connected to the system.
Configuration options: [Auto] [Not Installed]
SMART Monitoring [Enabled]
Allows you to set the Self-Monitoring, Analysis and Reporting Technology.
Configuration options: [Disabled] [Enabled]
4-14
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
:Not Detected
[Auto]
[Enabled]
BIOS SETUP UTILITY
[35]
BIOS SETUP UTILITY
Some SATA CD/DVD in
AHCI mode need to
wait ready longer.
Select Screen
←→
Select Item
↑↓
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Select the type
of device connected
to the system.
Chapter 4: BIOS setup