Asus Z8NA-D6 - Motherboard - ATX User Manual page 112

11. Follow step 2 to 10 to configure additional virtual drives.
12. Press <Esc> to finish RAID configuration. When prompted to save
configuration, select Yes from the menu, and then press <Enter>.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
Using New Configuration
When a RAID set already exists, using the New Configuration command
erases the existing RAID configuration data. If you do not want to delete the
existing RAID set, use the View/Add Configuration command to view or create
another RAID configuration.
To create a RAID set using the New Configuration option
1. From the Management Menu, select Configure > New Configuration, and
then press <Enter>.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
5-10
LSI Software RAID Configuration Utility Ver A.60 Jul 30, 2008
BIOS Version
Configuration Menu
Easy Configuration
New Configuration
View/Add Configuration
Clear Configuration
Virtual Drive(s) Configured
Select Boot Drive
LD RAID Size
0 1 77247MB
Select Yes Or No
LSI Software RAID Configuration Utility Ver A.60 Jul 30, 2008
BIOS Version
Configuration Menu
Easy Configuration
New Configuration
View/Add Configuration
Clear Configuration
Select Boot Drive
Clear Existing Configuration And Start A New Configuration
A.08.09161344R
Save Configuration?
Yes
No
#Stripes StripSz
2 64 KB
A.08.09161344R
Status
ONLINE
Chapter 5: RAID configuration