Asus Z8NA-D6 - Motherboard - ATX User Manual page 31

2. Press the load lever with your
thumb (A), then move it to the left
(B) until it is released from the
retention tab.
To prevent damage to the socket
pins, do not remove the PnP cap
unless you are installing a CPU.
3. Lift the load lever in the direction of
the arrow to a 135º angle.
4. Lift the load plate with your thumb
and forefinger to a 100º angle.
5. Remove the PnP cap from the CPU
socket.
ASUS Z8NA-D6 Series
Retention tab
A
B
Load lever
Load plate
4
PnP cap
3
2-11