Ahci Configuration; System Information - Asus MAXIMUS III EXTREME User Manual

3.4.6

AHCI Configuration

This menu is the section for AHCI configuration. It appears only when you set the
item Configure SATA as from the sub-menu of SATA Configuration to [AHCI].
Main
AHCI Settings
SATA Port1 [Not Detected]
SATA Port2 [Not Detected]
SATA Port3 [Not Detected]
SATA Port4 [Not Detected]
SATA Port5 [Not Detected]
SATA Port6 [Not Detected]
SATA Port1–6 [XXXX]
Displays the status of auto-detection of SATA devices.
Main
SATA Port1
Device :Not Detected
SATA Port1
SMART Monitoring
SATA Port1 [Auto]
Allows you to select the type of device connected to the system.
Configuration options: [Auto] [Not Installed]
SMART Monitoring [Enabled]
Allows you to set the Self-Monitoring, Analysis and Reporting Technology.
Configration options: [Disabled] [Enabled]
3.4.7

System Information

This menu gives you an overview of the general system specifications. The BIOS
automatically detects the items in this menu.
Main
BIOS Information
Version : 0209
Build Date: 12/09/09
Processor
Type : Genuine Intel(R) CPU @ 2.80GHz
Speed : 2800MHz
System Memory
Usable Size : 2040MB
3-20
[Auto]
[Enabled]
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
BIOS SETUP UTILITY
BIOS SETUP UTILITY
BIOS SETUP UTILITY
While entering setup,
BIOS auto detects
the presence of
SATA devices. This
displays the status
of auto detection of
SATA devices.
Select the type
of devices connected
to the system.
←→ Select Screen
↑↓ Select Item
+- Change Field
F1 General Help
F10 Save and Exit
ESC Exit
Chapter 3: BIOS setup