Ahci Configuration; System Information - Asus P7P55D PRO User Manual

3.4.3

AHCI Configuration

This menu is the section for AHCI configuration. It appears only when you set the item
Configure SATA as from the submenu of SATA Configuration to [AHCI].
Main
AHCI Settings
SATA Port1 [Not Detected]
SATA Port2 [Not Detected]
SATA Port3 [Not Detected]
SATA Port4 [Not Detected]
SATA Port5 [Not Detected]
SATA Port6 [Not Detected]
SATA Port1–6 [XXXX]
Displays the status of auto-detection of SATA devices.
SATA Port1–6 [Auto]
[Auto]
[Not Installed]
SMART Monitoring [Enabled]
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system.
When read/write of your hard disk errors occur, this feature allows the hard disk to
report warning messages during the POST.
[Enabled]
[Disabled]
3.4.4

System Information

This menu gives you an overview of the general system specifications. The BIOS automatically
detects the BIOS information, CPU specification, and system memory in this menu.
Main
BIOS Information
BIOS Version : 0166
BIOS Build Date : 07/08/09
EC BIOS Version : MBEC-0024
Processor
Type : Genuine Intel(R) CPU @ 2.13GHz
Speed : 2139MHz
System Memory
Usable Size : 1016MB
ASUS P7P55D PRO
BIOS SETUP UTILITY
Allows automatic selection of the device type connected to the
system.
Selects this option if no SATA devices are installed.
Enables the SMART monitoring feature.
Disables the SMART monitoring feature.
BIOS SETUP UTILITY
3-13