Primary/Secondary Ide Master/Slave Submenus - Intel D845GLVA Product Manual

Intel Desktop Board D845GLVA Product Guide

Primary/Secondary IDE Master/Slave Submenus

Maintenance
There are four IDE submenus: Primary master, primary slave, secondary master, and secondary
slave. Table 14 shows the format of these IDE submenus. For brevity, only one example
is shown.
Table 14.

Primary/Secondary IDE Master/Slave Submenus

Feature
Drive Installed
Type
Maximum Capacity
LBA Mode Control
(Note)
Block Mode
PIO Mode
(Note)
Ultra DMA
(Note)
Cable Detected
Note: These configuration options appear only if an IDE device is installed.
44
Main Advanced
IDE Configuration
Options
None
• Auto (default)
• User
None
None
• Disabled
• 2 Sectors
• 4 Sectors
• 8 Sectors
• 16 Sectors (default)
• Auto (default)
• 0
• 1
• 2
• 3
• 4
• Disabled (default)
• Mode 0
• Mode 1
• Mode 2
• Mode 3
• Mode 4
• Mode 5
None
Security Power
➜
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Description
Displays the type of drive installed.
Specifies the IDE configuration mode for IDE devices.
Auto fills-in capabilities from ATA/ATAPI device.
User allows capabilities to be changed.
Displays the capacity of the drive.
Specifies LBA mode control.
Specifies number of sectors per block for transfers from
the hard disk drive to memory.
Check the hard disk drive's specifications for optimum
setting.
Specifies the PIO mode.
Specifies the Ultra DMA mode for the drive.
Displays the type of cable connected to the IDE
interface: 40-conductor or 80-conductor (for
ATA-66/100 devices).
Boot Exit