Setting The Bios Configuration Jumper - Intel D101GGC Product Manual

Intel Desktop Board D101GGC Product Guide

Setting the BIOS Configuration Jumper

NOTE
Always turn off the power and unplug the power cord from the computer before changing the
jumper. Moving the jumper with the power on may result in unreliable computer operation.
Figure 23 shows the location of the desktop board's BIOS configuration jumper block.
Figure 23. Location of the BIOS Configuration Jumper Block
The three-pin BIOS jumper block enables all board configuration to be done in the BIOS Setup
program. Table 9 shows the jumper settings for the Setup program modes.
44
1
2
3
BR1
OM18222