Installation Precautions; Prevent Power Supply Overload; Observe Safety And Regulatory Requirements - Intel D101GGC Product Manual

Intel Desktop Board D101GGC Product Guide

Installation Precautions

When you install and test the Intel desktop board, observe all warnings and cautions in the
installation instructions.
To avoid injury, be careful of:
•
Sharp pins on connectors
•
Sharp pins on printed circuit assemblies
•
Rough edges and sharp corners on the chassis
•
Hot components (like processors, voltage regulators, and heat sinks)
•
Damage to wires that could cause a short circuit
Observe all warnings and cautions that instruct you to refer computer servicing to qualified
technical personnel.

Prevent Power Supply Overload

Do not overload the power supply output. To avoid overloading the power supply, make sure that
the calculated total current loads of all the modules within the computer is less than the output
current rating of each of the power supplies output circuits.

Observe Safety and Regulatory Requirements

Read and adhere to the instructions in this section and the instructions supplied with the chassis and
associated modules. If you do not follow these instructions and the instructions provided by chassis
and module suppliers, you increase safety risk and the possibility of noncompliance with regional
laws and regulations.
Refer to Appendix A for safety and regulatory requirements.
24