Samsung 27” SA850 LED Monitor User Manual page 61

6
Setup and Reset
bar level will decrease with a moon image displayed. The brightness slide bar will be displayed
for 3 seconds after the sensor activates.
A pop-up as shown above will appear when an energy tree completes while
is On.
If the above picture is displayed, it means the
setting to
The amount of energy saved by the
functions will accumulate and the progress can be viewed as a growing energy tree.
The energy tree grows as the energy savings of the monitor accumulate. Accordingly, the
tree's growth will also be affected by other functions that involve power consumption such as
the brightness control function.
The amount of energy savings accumulated by using the power-saving functions, such as
Motion
amount of carbon dioxide.
A complete energy tree will be displayed when the amount of energy savings accumulates to as
much as the amount of carbon dioxide a tree absorbs in a year. This shows that your energy
saving is as effective as planting a tree so that you can easily understand the accumulation of
energy savings over time and its effect by viewing the progress of a tree growing.
The progress of a tree growing will be represented as 10 different images (stages). After one
full-grown tree is complete, the initial image will be restored and the number of trees will
continue to accumulate. The number for energy trees will be rounded to one decimal place.
Off if you do not want to display the pop-up.
Sensor, Eco Light Sensor
You've saved
* tree(s).
Eco Icon Display
Eco Motion Sensor, Eco Light
and Eco Saving, will be calculated and represented as an
Eco Icon Display
option is On. Change this
Sensor, and Eco Saving
Eco
61
6 Setup and Reset