Step 4, Connect Power; Step 5, Install Filters, Check Operation; Cleaning - GE PVB98STSS Installation Instructions Manual

4 CONNECT POWER
Plug power cord into properly grounded receptacle.
5 INSTALL FILTERS, CHECK OPERATION
to raise the vent.
straight up and pull forward.
Filter Tabs
• Press the Fan Speed HIGHER pad to start the
blower. Adjust the blower by pressing HIGHER or
LOWER.
•
NOTE: It is not necessary to turn the fan OFF
before lowering the vent. The fan will automatically
turn off when the vent is lowered. When the fan
is not turned off before lowering the vent, it will
automatically come on at the previously set speed
when the vent is fully raised.
IMPORTANT: The vent can be activated by pressing
the pads on the switch. Do not use excessive force
or sharp objects to activate the switch. Damage
could occur and void the warranty.
Installation Instructions
Retainers
13