GE PVB98STSS Installation Instructions Manual page 6

CUTOUTS AND CLEARANCES
• Measure carefully when cutting the countertop.
• Make sure sides of the opening are parallel and
rear and front cuts are exactly perpendicular
• Measure to be sure there is room for clearances
to the front edge of the countertop.
• Refer to cooktop installation instructions to be sure
• Draw lines on the countertop to follow as a cutting
guide.
• Measure and mark cooktop and vent overlaps to be
vent body. The cabinet back wall should be within
Cooktop
4-1/2" Max
Side View: Installed Vent
30" COOKTOP AND DOWNDRAFT
COMBINATION
The cooktop must be installed per manufacturer's
installation instructions.
IMPORTANT: The countertop cutout depth requires
minimum total countertop depth.
NOTE: Before you begin, measure and mark depth
is available.
For cooktop and downdraft combination depth:
• Follow cooktop installation instructions for cooktop
and downdraft combination installation.
NOTE:
Installation Preparation
Creative Solutions
Cooktop
5-1/2"
5-1/2"
Max
Max
Front View: Installed Vent
• Measure the base cabinet width at the top and
bottom to ensure it meets the minimum width
requirements .
Width
"A"
Width
top behind cutout required
*Required to maintain UL or CSA approvals
6
"A"
MODEL "A" Minimum Width
PVB98
34"
ZVB36
PVB94
28-1/2"
ZVB30
30"