Lenovo RS110 - ThinkServer - 6438 User Manual page 39

8. Place the adapter, component side up, on a flat, static-protective surface and
set any jumpers or switches as described by the adapter manufacturer, if
necessary.
9. Carefully grasp the adapter by its top edge or upper corners and align it with
the expansion slot in the riser card assembly; then, press the adapter firmly
into the expansion slot.
1
Expansion-slot bracket
2
Tab
Important: Make sure that the U-shaped opening in the metal adapter bracket
engages the tab on the expansion-slot bracket.
10. Follow the cabling instructions, if any, that come with the adapter.
11. Carefully align the riser-card assembly with the guides on the rear of the server
and with the riser-card connectors on the system board; then, press down on
the assembly. Make sure that the riser-card assembly is fully seated in the
riser-card connector on the system board.
1 Power cable
2 PCI X-slot
3
Adapter
4
Adapter bracket
Chapter 2. Installing optional devices
25