Creating A Backup Configuration (Windows Nt) - HP D6030A - NetServer - E50 Getting Started

Chapter 4

Creating a Backup Configuration (Windows NT)

NOTE
Instructions for creating a backup configuration are provided
separately for Windows NT and Novell NetWare systems. This
section applies only to HP NetServers running Windows NT.
The Configuration Wizard is your starting point for setting up your Replica
backups. With the Wizard, it is easy to create a configuration that backs up
specified server volumes on a regular schedule.
The Wizard walks you through a complete configuration--prompting you to
identify the location of the tape drive, choose the volumes that you want backed
up, and specify a time of day for backup to occur.
Follow these instructions to create a default configuration for automatic backup
of an HP NetServer running Windows NT.
1. Insert a blank tape cartridge in the HP SureStore T20 tape drive.
2. From the desktop or Start menu, open the Configuration Wizard
shortcut.
The Wizard starts and displays a welcome screen.
3. Click Next to go to the Tape Drive Selection window where you identify
the tape drive you'll be using for backups.
Figure 4-1. Tape Drive Selection Window
16
Backing Up Your Data