Dismounting The Tape Volume - HP D6030A - NetServer - E50 Getting Started

Chapter 5
10. After the tape is mounted as a volume and connected to the administration
PC, use the Windows Explorer or File Manager to copy the restored files
to the proper location.
NOTE Do not close the Mount Tape window if you plan to
immediately dismount the tape volume--it must be open with
the tape volume selected for Replica to dismount the tape. If
you close the window, you must restart Replica, click the
Status button to open the Status window, then click the Device
Status tab to display the mounted jobs.
When you've finished copying the files to the desired locations, you must
now dismount the tape before continuing with any other operations. For
instructions, see the following section, "Dismounting the Tape Volume."

Dismounting the Tape Volume

When you have finished copying the replacement files, you must dismount the
tape, thereby removing it from the list of available volumes. After dismount, the
tape is no longer recognized by the HP NetServer as a removable volume.
To dismount the tape volume:
1. Verify that none of the files on the mounted tape volume are open or in
use.
2. If you are dismounting from a server running NetWare, close any
Explorer or File Manager windows open on the client computer's desktop.
3. Start the Replica application from the Program Manager.
4. When the main window appears, click Status to display the Status
window.
5. Move the Device Status tab to the front of the window, then select the
Mounted job representing the tape volume.
6. Click the Dismount button.
Restoring Files and Folders
37