Set The Date And Time; What Is Standby Mode; Check The Signal Strength; Self-Defined Settings - RCA 2102 User 's guide User Manual

Set the date and time

1 P r e s s MENU.
2 S e l e c t [CLOCK] > [SET DATE/TIME], then press [OK] to confirm.
3 Press the numeric buttons to enter the date, then press [OK] to confirm.
»» On the handset , the time set menu is displayed.
4 Press the numeric buttons to enter the time.
• If the time is in 12-hour format, press
/
to select [AM] or [PM].
5 Press [OK] to confirm.

What is standby mode?

Your phone is in standby mode when it is idle. The standby screen displays the
handset name, handset number, date and time, signal icon, and battery icon.

Check the signal strength

It displays the link status between the handset and base station. The signal
icon was shown steady on when handset is linked with base.
Ensure the handset is linked to the base station before you make or receive
calls and carry out the phone functions and features.
If you hear warning tones when you are on the phone, the handset is almost
out of battery or the handset is out of range. Charge the battery or move the
handset closer to the base station.

Self-defined settings

Customize the settings to make it your own phone.

Personalize the phone display

Name the handset
The name of the handset can be up to 12 characters. It is displayed on the
handset screen in standby mode.
1 Press MENU.
2 Select [PERSONAL SET] > [HANDSET NAME], then press [OK] to confirm.
3 Enter or edit the name. To erase a character, press [BACK].
4 Press [OK] to confirm.
»» The setting is saved.
Set the display language
1 Press MENU.
2 Select [PERSONAL SET] > [LANGUAGE], then press [OK] to confirm.
3 Select a language, then press [OK] to confirm.
»» The setting is saved.
15