Frequently Asked Questions - RCA 2102 User 's guide User Manual

Master pin
First ring
Conference
Dial mode
H/S ringer melody
H/S ringer volume
H/S earpiece volume Volume 3
Handset key beep
Incoming call log
Redial list
Answering Machine
Answer On/Off
Answer mode
HS screening
Remote access
OGM
Ring delay
ICM length
Base playback volume L5
Base screening volume L5

Frequently asked questions

The signal icon blinks on the screen
• The handset is out of range. Move it closer to the base station.
• If the handset displays [UNREGISTERED], register the handset.
Tip
• For more information, see "Registration" on the Advanced settings section.
If I fail to register the additional handsets to the base station, what
do I do?
Your base memory is full. Un-register the unused handsets and try again.
No dialing tone
• Check your phone connections.
• The handset is out of range. Move it closer to the base station.
No docking tone
• The handset is not placed properly on the base station/charger.
• The charging contacts are dirty.
Disconnect the power supply first and clean the contacts with a damp cloth.
0000
On
On
Tone
Melody 1
Level 3
On
Empty
Empty
On
Answer & Rec.
Off
On
Pre-recorded announcement
5 rings
3 min
33