Wyse R50L Installation Manual page 9

Converting Wyse R Class to ThinOS
Figure 3 Wyse USB Firmware Tool wizard
2. Click Next to open the Select an Option dialog box.
Figure 4 Configuration options
3. Select the Configure a single USB key to Copy or to Update firmware option, and
then click Next to open the Select the Configuration dialog box.
Figure 5 Update firmware options
4. Select the WTOS / Xenith OS type option.
5. Select the Update Firmware operation to perform option. Note that all three contents
options are selected by default (OS Image, BIOS, and CMOS).
6. Click Next to open the browse dialog box.
5