Disk Array Configuration Report - HP StorageWorks P9000 Integration Manual

Table 2 Report locations and available filters (continued)
Report
"OS file system mount point to storage device mapping
report" (page 16)
"Database usage summary report" (page 17)
"Storage device to OS device mapping report" (page 17)
"Front-end performance statistics" (page 18)
"Back-end performance statistics" (page 18)
"User selected database performance statistics report"
(page 19)
"User selected LUNs performance statistics report"
(page 19)
"Ports performance statistics report" (page 20)
1 To reduce report page load time, filter selections are not updated in the reports until you click Go.
Report filter descriptions
"Filter names and descriptions" (page 13)
Table 3 Filter names and descriptions
Filter name
Array Serial No.
Controller Port
CU:LDEV
Database
Disk group
Host
Storage Type

Disk array configuration report

This report provides the disk array configuration information presented to the host where the plug-in
is deployed.
If no command device is installed, the array is not listed. However, if a LUN from the disk array
is used by one of the Oracle Enterprise Manager managed hosts, the disk array is listed, but
without any details. The Plug-in Configured column indicates if the command device is configured
and accessible to a host.
1
Filter description
Filters for LUNs belonging to a disk array. You can select a single disk array serial number or
all arrays by selecting All Arrays from the list.
Filters for a controller port. Enter the controller port name in the text box. If this field is blank,
all controller ports are displayed in the report.
Used to select a single LUN. Enter the LUN in the format of CU:LDEV. If this field is blank,
all LUNs are displayed in the report.
Field used to enter a filter for a database. Enter the database name in the text box. If this field
is blank, all databases are displayed in the report.
Field used to enter a filter for a disk group. Enter the disk group name in the text box. If this
field is left blank, all disk groups are displayed in the report.
Field used to filter hosts for a report. You can select a single host or all hosts by selecting All
Hosts.
Filters for a database storage type (File System, ASM & RAW).
Available Filters
LUN (in the format of CU:LDEV)
Array Serial Number (Array Serial No.)
Host
None
1
LUN (in the format of CU:LDEV)
Array Serial Number (Array Serial No.)
Host
None
None
None
None
None
lists report filter names and filter descriptions.
Disk array configuration report 13