Information needed for authenticating management groups
Prerequisites
You need the following information (credentials) for the management groups you want to authenticate
for VSS:
•
Management group name
•
User name and password for logging in to the management group.
Choosing between default or individual credentials
If you use the same user name and password to log into all your management groups, you can
designate default credentials for that user name and password combination.
If you use unique user name and password combinations for different management groups, you can
define individual credentials for different management groups.
Setting the credentials
To use VSS, you must enter the user name and password for management groups containing the
volumes to snapshot.
With the latest version of the VSS Provider, you may find that the credentials are already configured.
This is because in some situations, the system may automatically discover authentication from the
SAN.
Opening the Authentication Console
Open the Authentication Console from the Programs menu.
Credentials wizard
The first time you open the Authentication Console, the Credentials wizard opens. At other times, you
can open the Credentials wizard from the Action menu or the right-click menu. For information about
using the Credentials wizard, see
Figure 16 Opening the Credentials wizard the first time
.
Authentication Console window
The Authentication Console window opens after you have entered management group credentials.
30
Using the Authentication Console
"Setting default credentials in the Credentials
wizard" on page 31.