Top of the SAS switch, near the back. To access the label, pull the affected SAS switch out of
the blade enclosure and look at the top of the SAS switch.
Back of the disk enclosure chassis, left-hand front, top corner of the chassis.
The back of the disk enclosure chassis may be the most accessible label, as shown in
(page
15).
Figure 6 Warranty entitlement label
Figure 7 Warranty entitlement label location
Performing field system recovery of the HP P4800 G2 solution
Overview
This section outlines the field system recovery procedures for the HP P4800 G2 solution, which
includes the following tasks:
Obtaining the feature registration license key for the HP P4800 G2 solution.
Re-imaging the HP P4460sb G2 storage blade with the SAN/iQ software and re-installing
the license key.
Before you start
Have the following items ready:
BIOS version I27, 09/30/2010 installed on the HP P4800 G2 solution
USB flash drive, formatted with a Windows FAT 32 file system (this is the default for Windows
XP)
HP StorageWorks P4800 Storage System Quick Restore CD
HP SmartStart CD x64
HP StorageWorks P4000 Storage System SAN/iQ Management Software DVD
Performing field system recovery of the HP P4800 G2 solution
Figure 7
15