Status Read Command; Format; Transfer Example; Operation Condition - Sanyo PLC-XU305A - 3000 Manual

PLC-XU305A/355A Expand Serial Command Functional Specifications

9. Status Read Command

9.1 Format

1) PC issues commands in format as below:
"CR_Command" [CR]
Command : Character Line
2) When projector receives the appropriate command, it returns a character line as the
required data
"000ÿ ? "%1 [CR]
%1: Required Data (Character Line. See [Basic Status Read Command Table])
3) When the received data cannot be decoded, the projector returns "?"[CR]

9.2 Transfer Example

Get total dots of projector by Expand Commands
PC → PJ: "CR_TDOTS" [CR]
PC ← PJ: "000_1344" [CR]

9.3 Operation Condition

1) Basically Status Read Commands should be always operated.
2) Status Read Commands are invalid when projector is in standby under Eco mode
43/68