Oki T400 User Manual page 26

Operation Manual
6. Dispense Mode: This is only valid for a printer with dispenser.
The label stop position can be selected:
a. Action 1: Stop at head position
b. Action 2: Stop at dispense edge
7. Print Darkness: General printer darkness setting correspond-
ing to different types of paper. Usually, Level "A" should be
used.
8. Darkness Level: The darkness can be adjusted in five steps,
from 1 (light) to 5 (dark). Usually, level 3 (normal) should be
used.
9. Sensor Type: Defines how the printer detects the horizontal
label gap:
a. Reflective I-mark: If label material with a black mark (I-
mark) on the back is used
b. See-through Gap: If "normal" label material is used
where the gap between the labels can be detected since
the contrast is different.
c. Not used: Disables the sensor for use with continuous
material.
10. Zero Slash: Defines if the "zero" character is printed with or
without slash.
11. Kanji Code: Switches between "JIS code" and "Shift JIS"
code. This setting is only valid when the printer-internal Kanji
fonts are used.
12. Paper Specification: This setting defines how the printer
reacts when the label material runs out:
a. Label: The printer will stop feeding immediately when
label end is detected.
b. Tag: The printer feeds further trying to find the next gap
(useful with TAG or fan-fold material)
13. First Feed: Defines if the printer will feed a blank label when
it's turned on. This will ensure the right print position on the first
label.
14. Proportional Pitch: Defines if some of the printer-internal
fonts will be printed proportional-spaced or fixed-spaced.
15. Label Size: Defines the label dimensions (horizontal and ver-
tical) in millimetres.
CT400/410
Configuration
19