Connecting To Projectors On A Different Network - Epson PowerLite Pro G5450WU Operation Manual

Connecting to the Projectors
q
You cannot perform mirroring with projectors that are not compatible
with EasyMP Multi PC Projection.
A
Start EasyMP Multi PC Projection, and search for the
projectors.
s "Searching for and Connecting to the Projectors"
B
Select up to four projectors that you want to connect to from
the list displayed, and then click Join.
The projection control screen is displayed.
• When forming a projector mirroring group
q
If you select one projector from a group, all of the projectors in that group
are selected.
When you select a projector in a mirroring group, you can only select
projectors in that group.
• When other participants are already connected to the projector
You can only select the same combination of projectors as the user who
connected before you. You cannot connect to projectors that are not
included in the combination.

Connecting to Projectors on a Different Network

By connecting the projectors to a computer, you can project the
computer's screen at remote locations (on different subnets).
In Automatic search, projectors on different subnets are not found
because searches are only performed in the same subnet.
You can connect to projectors on a different subnet using one of the
following methods.
• Specify either an IP address or projector name and perform a search.
s "Manual search"
• Perform a search based on a profile.
s "Profile search"
p.17
p.18
p.19
20