Apm Configuration; Hardware Monitor - Asus P5QL/EPU - Motherboard - ATX User Manual

2.6.4

APM Configuration

Restore.On.AC.Power.Loss.[Power.Off]
When set to [Power.Off], the system goes into off state after an AC power loss. When set
to [Power.On], the system goes on after an AC power loss. When set to [Last.State], the
system goes into either off or on state, whatever the system state was before the AC power
loss. Configuration options: [Power Off] [Power On] [Last State]
Power.On.By.RTC.Alarm.[Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item is set to
Enabled, the items RTC Alarm Date/ RTC Alarm Hour/ RTC Alarm Minute/ RTC Alarm
Second will become user-configurable with set values.
Configuration options: [Disabled] [Enabled]
Power.On.By.External.Modems.[Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the computer when the
external modem receives a call while the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]
The computer cannot receive or transmit data until the computer and applications are fully
running. Thus, connection cannot be made on the first try. Turning an external modem
off and then back on while the computer is off causes an initialization string that turns the
system power on.
Power.On.By.PCI.Devices.[Disabled]
Allows you to enable or disable the PME to wake up from S5 by PCI devices.
Configuration options: [Disabled] [Enabled]
Power.On.By.PCIE.Devices.[Disabled]
Allows you to enable or disable the PCIE devices to generate a wake event.
Configuration options: [Disabled] [Enabled]
Power.On.By.PS/2.Keyboard.[Disabled]
Allows you to disable the Power On by PS/2 keyboard function or set specific keys on
the PS/2 keyboard to turn on the system. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Space Bar] [Ctrl-Esc] [Power Key]
Power.On.By.PS/2.Mouse.[Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse to turn on the
system. This feature requires an ATX power supply that provides at least 1A on the +5VSB
lead. Configuration options: [Disabled] [Enabled]
2.6.5. Hardware.Monitor
CPU.Temperature.[xxxºC/xxxºF]..
MB.Temperature.[xxxºC/xxxºF].
The onboard hardware monitor automatically detects and displays the motherboard and CPU
temperatures. Select [Ignored] if you do not wish to display the detected temperatures.
ASUS P5QL/EPU 2-19