Table of Contents
Advertisement
1.9.
Jumper
1..
Clear.RTC.RAM.(3-pin.CLRTC)
This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can
clear the CMOS memory of date, time, and system setup parameters by erasing
the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in
CMOS, which include system setup information such as system passwords.
To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on pins 2-3
for about 5-10 seconds, then move the cap back to pins 1-2.
3. Plug the power cord and turn ON the computer.
4. Hold down the <Del> key during the boot process and enter BIOS setup to re-enter
data.
Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default
position. Removing the cap will cause system boot failure!
• If the steps above do not help, remove the onboard battery and move the jumper again
• You do not need to clear the RTC when the system hangs due to overclocking. For
• Due to the chipset limitation, AC power off is required before you use the C.P.R.
P5QL/EPU
P5QL/EPU Clear RTC RAM
1-18
to clear the CMOS RTC RAM data. After the CMOS clearance, reinstall the battery.
system failure due to overclocking, use the CPU Parameter Recall (C.P.R.) feature. Shut
down and reboot the system, then the BIOS automatically resets parameter settings to
default values.
function. You must turn off and on the power supply or unplug and plug the power cord
before rebooting the system.
CLRTC
1
2
2 3
Normal
Clear RTC
(Default)
Chapter 1: Product introduction
Hide quick links:
Advertisement
Table of Contents
