Asus P5KPL-AM - SE Motherboard And Intel Core 2 Duo User Manual page 37

11. ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)
These connectors are for ATX power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation and
push down firmly until the connectors completely fit.
P5KPL-AM ATX Power Connector
• For a fully configured system, we recommend that you use a power supply unit (PSU)
that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum
power of 400 W.
• Do not forget to connect the 4-pin ATX12V power plug. Otherwise, the system will not
boot.
• Use of a PSU with a higher power output is recommended when configuring a system
with more power-consuming devices. The system may become unstable or may not boot
up if the power is inadequate.
• The ATX 12 V Specification 2.0-compliant (400W) PSU has been tested to support the
motherboard power requirements.
ASUS P5KPL-AM
ATX12V
+12V DC +12V DC
GND GND
EATXPWR
+3 Volts +3 Volts
-12 Volts +3 Volts
Ground Ground
PSON# +5 Volts
Ground Ground
Ground +5 Volts
Ground Ground
-5 Volts Power OK
+5 Volts +5V Standby
+5 Volts +12 Volts
+5 Volts +12 Volts
Ground +3 Volts
1-27