Configure The Settings Relating To Image Quality Image Adjust" Setup Menu) Sw395 Sc385 - Panasonic WV-SC384 Operating Instructions Manual

Network camera
Hide thumbs Also See for WV-SC384:
Table of Contents

Advertisement

Configure the settings relating to image quality ("Image adjust" setup
menu)
SW395
SC385
Click the [Setup >>] button of "Image adjust" on the [Image/Position] tab of the "Image/Audio" page. (☞ Page 58)
The settings relating to image quality can be configured with the setup menu displayed in a newly displayed win-
dow. When the values are changed, the changed values will be applied to the currently displayed image on the
[Image/Position] tab.
[Super Dynamic(SD)]
Select "On" or "Off" to determine whether or not to
activate the super dynamic function.
Refer to the description "Super Dynamic function"
about the super dynamic function.
On: The super dynamic function will work.
Off: The super dynamic function will not work.
Default: Off
Note:
• When the following are observed depending on the
light condition, select "Off" for "Super
Dynamic(SD)".
• When flickering appears or the color changes on the
screen
• When noise appears in the brighter area on the
screen
• When "Outdoor scene" or "Indoor scene" is
selected for "Light control mode", this setting is
available.
Super Dynamic function
When there is wide variation between the illumina-
tion of light and dark areas of the location being
monitored, the camera adjusts the lens iris in accor-
dance with the brighter areas. This causes loss of
detail in darker areas. Conversely, adjusting the lens
brightness for the darker areas causes the brighter
areas to become washed out.
Super Dynamic digitally combines an image that is
set up for a clear view of the brighter areas with an
image that is set up for a clear view of the darker
areas, creating a final image that preserves overall
detail.
Subject in the dark area
is hard to notice...
[Face SD]
Select "On" or "Off" to determine whether or not to
interact with the Super Dynamic function.
On: The interactive control with face detection will
work.
Off: The interactive control with face detection will not
work.
Default: Off
Note:
• When "Off" is selected for "Super Dynamic(SD)", the
interactive control with face detection is deacti-
vated.
59
Subject in the bright area
is washed out...
Creates a clearer image
by digitally combining
images

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wv-sw395Wv-sc385Wv-sw395eWv-sc385eWv-sc384e

Table of Contents