Panasonic WV-SC384 Operating Instructions Manual page 15

Functions
Pan/tilt *
Zooming control *
Refresh
Resolution control
Image quality control
Home position *
Preset *
AUX control *
* Only displayed for users whose access level is "1. Administrator" or "2. Camera control" when "On" is selected
for "User auth." . (☞ page 87)
Outline of functions
Controls the camera direction. The camera will pan or tilt to each direction by pressing
the corresponding dial key.
It is possible to perform zooming operations of the camera by pressing "*" or "#".
Refreshes the camera images by pressing the dial key "5".
Changes the image capture size by pressing the dial key "0".
* I mage in the aspect ratio of "4:3(VGA)"
* Image in the aspect ratio of
"4:3(800x600)"
* Image in the aspect ratio of "16:9"
Note:
• Some cellular phones cannot change the image capture size even when resolution is
changed by resolution control.
It is possible to change the image quality between "Quality1" and "Quality2"
(☞ page 9).
The camera will move to the home position. (☞ page 56)
The camera will move to the designated preset position to display images by pressing the
dial key corresponding to the desired channel. (The dial key numbers are not displayed
for Preset No 5 or greater. Only preset IDs will be displayed for them.) (☞ Page 68)
Controls the AUX terminal.
These buttons will be displayed only when "AUX output" is selected for "Terminal 3" on
the setup menu. (☞ Page 75)
Changes the image capture size between
320x240 (default) and 640x480.
Changes the image capture size between
320x240 (default) and 640x480.
SW395 SC385
Changes the image capture size between
320x180 (default) and 640x360.
15