Table of Contents
Advertisement
5.3.3.10 Motion Detection
The Motion Detection setting can be found under this path: System> Motion Detection.
Motion Detection function allows detecting suspicious motion and triggering alarms when
motion volume in the detected area reaches/exceeds the determined sensitivity threshold
value.
In the Motion Detection setting page, there is a frame (Motion Detection Window) displayed
on the Live Video Pane as the figure below. The Motion Detection Window is for defining the
motion detection area. To change the size of the Motion Detection Window, move the mouse
cursor to the edge of the frame and draw it outward/inward. Moving the mouse to the center
of the frame can shift the frame to the intended location.
49
Advertisement
Table of Contents
