Synology Diskstation At A Glance - Synology DiskStation DS3612xs Quick Installation Manual

Synology DiskStation at a Glance

No. Name
1) Power Button
2) LED Indicators
Hard Drive Tray
3)
Lock
4) Hard Drive Tray
5) RESET Button
6) Expansion 1
7) Expansion 2
Power Supply
8)
On/Off Switch
9) Power Port
10)
LAN 1
11) LAN 2
12) LAN 3
13)
LAN 4
---------
1
For more information about Synology Expansion Unit supported by your DiskStation, please visit www.synology.com.
4 Chapter 1: Before You Start
Location
The power button is used to turn Synology DiskStation on or off.
Front Panel
To turn off Synology DiskStation, press the power button and hold it until you
hear a beep sound and the Power LED starts blinking.
The LED indicator is used to display the status of the internal disk and the
system. For more information, see "Appendix B: LED Indication Table" on Page
Front Panel
21.
The hard drive tray lock is designed for locking/unlocking the trays to the
Front Panel
DiskStation.
The hard drive tray is designed for loading the hard drives used in
Front Panel
Synology DiskStation.
1. To restore IP, DNS, passwords for the admin account to default value.
Back Panel
2. To reinstall the Synology DiskStation.
The Expansion port is used to connect Synology Expansion Unit
Back Panel
DiskStation.
The power supply on/off switch is used to turn on/off the power supply.
Back Panel
The power port is where you connect the power cord to Synology DiskStation.
Back Panel
The LAN port is where you connect RJ-45 cable to Synology DiskStation.
Back Panel
Description
1
to Synology