General Product Care; Location; Cleaning - Uniden BC355N Owner's Manual

gENERAl PROdUCT CARE

Turn the scanner off before disconnecting the power.
Always press each keypad button firmly until you hear the entry
tone for that key entry.

lOCATION

If strong interference or electrical noise is received, relocate the
scanner or its antenna away from the source of the noise. A higher
elevation, if possible, may provide better reception. You might also
try changing the height or angle of the telescoping antenna.
Do not use the scanner in high-moisture environments such as the
kitchen or bathroom.
Avoid placing the unit in direct sunlight or near heating elements
or vents.

ClEANINg

Disconnect the power to the unit before cleaning.
Clean the outside of the scanner with a soft cloth. To prevent
scratches, do not use abrasive cleaners or solvents. Be careful not
to rub the LCD window. Do not use excessive amounts of water.
61