Led Control - LevelOne FCS-6010 User Manual

TCP/UDP protocol
TCP - This protocol guarantees the complete delivery of streaming data and thus provides better
video quality. Nevertheless, the downside with this protocol is that its real-time effect is not as good
as that of the UDP protocol.
UDP - This protocol allows for more real-time audio and video streams. However, network packets
may be lost due to network burst traffic and images may be broken. Activate UDP connection when
occasions require time-sensitive responses and the video quality is less important.

LED Control

Select from the drop-down list to adjust the brightness of the camera's LED.
Click Apply or Reset to take effect.
/ Recording on/off: shows the status of recording video
/ MIC on/off: shows the status of MIC volume.
/ MD on/off: shows the status of Motion Detection
Camera Control Panel - There are two slider bars and eight control buttons on the remote controller.
They are describe as below:
Brightness and Mic volume adjustment - Drag the slider bar to adjust the image brightness level
and Mic volume. Click "Default" for default brightness setting and "Mute" for no sound. For more
Audio setting, please refer to the Audio configuration on page 22.
Speaker –You can output the audio form the computer's audio input terminal to the camera's built-in
speaker output.
Play or Stop - Click this button to play or stop the video.
Recording - Click this button to record video to your computer.
Snapshot - Click this button to capture and save still images.
Digital Zoom - Click this button to enable the zoom operation.
Mirror - horizontally reflect the display of the live video.
Flip - vertically reflect the display of the live video.
20