Authentication; Installing Plug-In - LevelOne FCS-6010 User Manual

5. Authentication

After opening the Web browser and typing in the URL of the Network Camera, a dialogue window
pops up to request a username and password. The user name and password for the Administrator
are assigned as "admin/admin". Upon successful authentication, the following figure is displayed.
The foreground is the login window and the background shows the message if authentication fails.
The user may check the option box to save the password for future convenience. This option is not
available to the Administrator for obvious reason.

6.1 Installing plug-in

For the initial access to the Network Camera in Windows, the web browser may prompt for
permission to install a new plug-in for the Network Camera on the Internet Explorer. Permission
request depends on the Internet security settings of the user's PC or notebook. If the highest security
level is set, the computer may prohibit any installation and execution attempt. This plug-in has been
registered for certificate and is used to display the video in the browser. Users may click on
to proceed. If the web browser does not allow the user to continue to install, check
the Internet security option and lower the security levels or contact your IT or networking supervisor
for help.
16