System - D-Link DCS-7010L User Manual

Section 4: Configuration
In this section, you may backup, restore and reset the camera configuration, or reboot the camera.
Save To Local Hard Drive:
Load From Local Hard Drive:
Restore to Factory Default:
Reboot Device:
D-Link DCS-7010L User Manual
You may save your current camera configuration as a file
on your computer.
Locate a pre-saved configuration by clicking Browse and
then restore the pre-defined settings to your camera by
clicking Load Configuration.
You may reset your camera and restore the factory
settings by clicking Restore Factory Defaults.
This will restart your camera.

System

72