Special Menu Setting [Special Setup]; Chroma Level Adjustment [Chroma Gain]; Aperture Level Adjustment [Ap Gain]; Pedestal Level Adjustment [Pedestal] - Panasonic WV-CW504S Operating Instructions Manual

Special menu setting [SPECIAL SETUP]

The special menu setup is performed including the setting of the camera image quality and the communication configuration when a
receiver is used. The following settings are to be configured on the "SPECIAL SETUP" screen displayed from the top screen. Refer to
page 5 for how to call up the screen.
"SPECIAL SETUP" screen
**SPECIAL SETUP**
... ...128
CHROMA GAIN
|
... ... 32
AP GAIN
|
... ... 32
PEDESTAL
|
... ...
HUE
|
- +
PIX OFF
CAMERA RESET PUSH SW
SER.NO. XXXXXXXX
RET TOP END

Chroma level adjustment [CHROMA GAIN]

Use the right or left button to adjust the color density of the camera image. When the level indicator moves in the "+" direction, the
color becomes deeper, and when the level indicator moves in the "–" direction, the color becomes lighter. Be sure to view a vector
chromaticity indicator or a monitor when the adjustment is performed.

Aperture level adjustment [AP GAIN]

Use the right or left button to adjust the image quality. When the level indicator moves in the "+" direction, the image becomes sharp-
er, and when the level indicator moves in the "–" direction, the image becomes softer. Be sure to view a monitor when the adjustment
is performed.
Note:
• Moire (interference fringes) may be observed when shooting a subject with fine pattern such as a carpet or a curtain. In such a
case, move the indicator in the "-" direction to reduce moire.

Pedestal level adjustment [PEDESTAL]

Use the right or left button to adjust the pedestal level of the camera. When the level indicator moves in the "+" direction, the image
becomes brighter, and when the level indicator moves in the "–" direction, the image becomes darker. Be sure to view a waveform
monitor or a monitor when the adjustment is performed.

Chroma phase (hue) adjustment [HUE]

Use the right or left button to adjust the pedestal level of the camera. Be sure to view a vector chromaticity indicator or a monitor
when the adjustment is performed.
Note:
• Holding down the right and left buttons for more than 2 seconds simultaneously restores the settings of "CHROMA GAIN", "AP
GAIN", "PEDESTAL", and "HUE" to the default settings.
0
27