LevelOne FCS-3051 User Manual page 59

Trigger by
Actions
Attachment Type
•
Input - This describes the states that the input must be in for an
event to be triggered. Only one input can be used, also note that
the states for the input used must first be reached before the
event will be triggered.
•
PIR - If the PIR sensor detects a human body, it will be used to
trigger events.
•
Motion Detection - Movement in a motion detection window
can be used to trigger events.
•
E-Mail - If checked, an E-Mail (with "Attachment") will be
delivered to the SMTP server. (SMTP Server must be
configured on the E-Mail page.)
•
FTP - If checked, an FTP upload will be activated to the FTP
server. (FTP servers must be configured on the FTP page.)
•
Output Port - If checked, the output port state will be activated
as configured. (Output port must first be configured on the I/O
Port page.)
•
HTTP - If checked, an Instant Messaging (IM) will be delivered
to the Jabber server. (Jabber server must be configured on the
Instant Messaging page.)
•
SMB - If checked, JPEG image(s) or video files will be
uploaded to the SMB server. (SMB must first be enabled and
configured on the SMB Client page.)
•
JPEG Image:
Frame Rate - Select the desired capture rate (1~5) for the JPEG
image(s) here.
Pre/Post Capture - Select the desired length. The snapshot(s) of
the JPEG image depends on this setting, and also the file size
and degree of compression.
•
Video:
Video Format - Select the desired type for the video file.
Pre/Post Capture - Select the desired length. The size of the file
depends on this setting, and also the Video size and degree of
compression.
Note: The total length of Pre/Post Capture is 5 seconds that is limited
by the flash size.
55